Home > Earthing Sheets, Sleep Pads, Blankets >

Fitted Sheet Cal King Kit
Earthing - Fitted Sheet Cal King Kit

Discontinued until further notice!
Our Price: $261.94

Availability:: Usually Ships in 24 Hours
Product Code: 0070

Description Instructions
Fitted Sheet California King Kit - Extra long Cal King Size Fitted Sleep Systems is a natural colour poly/cotton fitted sheet containing woven in conductive silver fibres.
Discontinued until further notice!

How Do I Use The sheet? The Bed pad is generally placed at the foot end of the bed, horizontally across the bottom fitted sheet, and tucked around and under the mattress. The idea is that your legs and feet will be in contact with the bed pad while you sleep. The Bed pad can also be placed lengthwise on the bed as well for full body contact. Placing any part of your body on the sheet grounds you during sleep. How Do I Ground The Bed pad? The sheet connects to the Earth via a grounding cord included with purchase. One end of the cord snaps onto the sheet and then the prong end of the cord connects into the ground port of a three prong outlet. Grounding equipment plugs are only compatible with U.S. and Canadian outlets. If you are a customer outside of the U.S. or Canada, you will most likely need to use the Grounding Rod included with the sheet instead of the grounding cord. One end of the Grounding Rod snaps onto the sheet, and then the Rod itself is placed directly into the Earth outside. If you have grounded outlets outside the U.S. and Canada, you may just need to purchase an adapter online to switch to the correct hole size. If this is the case, please ensure that the adapter has metal inside the prongs on the adapter. If it is all plastic, the grounding connection will not be made. Does The Bed pad Need To Come Into Contact With Bare Skin? No, you don't need bare skin against the bed pad, but it's always best if you can! If it is too cold for bare skin contact, you can have a thin layer of clothing against the bed pad. The sweat from your body will act as a conductor through the fabric of your clothing, but the amount of perspiration and the thickness of the clothing will permit varying degrees of conductivity. To be sure you are fully grounded, bare skin is best. How Do You Wash The Bed pad? The Bed pad may be laundered in the washing machine with other bedding. Please use a gentle wash cycle and a mild detergent. NO chlorine bleach or fabric softener should be used. When necessary, use a hydrogen peroxide-based non-bleach to remove stains. We recommend hang to dry. You can tumble dry on low setting, but not recommended. Tumble dry will shorten the life span of your sheet, but low temperature is ok. Directions for use and care How to set up your Earthing sheet 1. Place the Earthing sheet over your mattress and stretch each corner gently to fit contour of the mattress, as you would any fitted bottom sheet. 2. Insert one end of the Earthing cord into the ground port (third hole) of a properly grounded wall outlet or connect to cord of an Earthing ground rod placed in the Earth outside. 3. Find the connecting tab on the sheet and snap other end of Earthing cord onto the tab. 4. When you lie down on the connected sheet, any bare skin contact will transfer the Earths energy to your body once you connect the sheet. Test your sheet with the conductivity tester Click here to see the Earthing conductivity tester video (or image of footprint or tester) Clicking takes viewer to tester video) The purpose of the tester is to verify that your Earthing sheet is conductive. It contains two replaceable batteries. 1. Insert prong end of splitter into grounded outlet or ground rod cord. 2. Plug Earthing cord from sheet into one of the two splitter receptacle ends. 3. Insert prong end of tester cord into the other splitter receptacle. 4. Place product tester flat on the sheet. The round metal plate must be in contact with surface of sheet. Press firmly on the sheet to obtain a good contact. A green light means that sheet is in working order. In unlikely case that no green light comes on, the sheet may be defective or has lost conductivity and should be replaced. Sometimes, people have difficulty testing their sheets. If the light doesnt come on, place one hand on the sheet while holding the tester in the other hand and with one finger on the silver button on back of tester. A green light would show that the body is grounded when touching the sheet. Make sure that both the tester and the sheet are plugged in to the ground, as described above. The reason for perhaps the light not going on: you aren't pressing hard enough on the tester. The surface fabric of the sheet sometimes prevents the button from contacting the conductive silver fibers of the sheet. The surface seems smooth, but if you were to look at it with a microscope you would see "hills and valleys." The pliant surface of the skin, unlike the hard metal button, will bend around fibers and make good contact. You can also put some moisture on your finger tips to create a better contact. 5. Disconnect splitter from the ground connection, then disconnect cords from the splitter. 6. Re-insert Earthing cord from sheet into ground connection. 7. You dont have to test your sheet often. Perhaps after cleaning. The more you use the tester, the sooner the batteries in the tester will expire. How to care for your Earthing sheet The sheet may be machine washed using warm setting, approximately 105 degrees Fahrenheit (40 celsius). Tumble dry using medium setting, up to 150 degrees Fahrenheit (65 Celsius). Do not use chlorine bleach or liquid fabric softener, or any detergent containing bleach or fabric softener, chemicals that can ruin the conductivity of your sheet. Do not dry clean your sheet. When necessary, use hydrogen peroxide-based non-bleach to remove stains and/or to whiten. Do not apply lotions, creams, or oils to the skin before bedtime on parts of your body that will be in contact with the Earthing sheet. Such substances oxidize and can damage conductivity. We are located in Toronto, Ontario Canada
How-to use a Fitted Sheet
  • Includes:
  • 1 California King 72 x 84 inches (182 x 213 cm) with a 16" pocket
  • 1 Straight Cord (15 foot long)
  • 1 Outlet checker
  • 1 users guide

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Earthing Sheets, Sleep Pads, Blankets