Greenwave EMI Meter
120-volt model:
Compatible with AC electrical systems/circuits with voltage ratings
from 100 volts up to 150 volts (for example: 100v, 110v, 115v, 120v, and
127v)
Greenwave's revolutionary do-it-yourself EMI meter enables individuals
to easily measure and monitor levels of dirty electricity, or
electromagnetic interference (EMI), on AC power lines in their homes,
workplaces, and other buildings. It works on any AC system worldwide
and can measure the...
- Average level of EMI on a circuit before installation of one or more dirty electricity filters
- New level of EMI on the circuit after installation of filter(s)
- Percent of total EMI "noise" between 2 Kilohertz and 10 Megahertz reduced by installing the filter(s)
KEY FEATURES
Measures broadest range of EMI signals available
Measures
EMI signals from 2 Kilohertz up to 10 Megahertz, a range that extends
approximately 10 times lower and 20 times higher than the range covered
by other dirty electricity meters on the market
First plug-in EMI meter to measure dirty electricity in millivolts
Shows measurements in internationally accepted, standardized electrical units (mV)
Easy to use
Simply
plug the meter into any outlet to see how much dirty electricity is on
the circuit near the outlet. Plug a dirty electricity filter into the
same outlet and the meter will also show the new (post-filter) level of
EMI and the percent of total EMI reduced by the filter.
Makes "BEFORE filter" and "AFTER filter" EMI comparisons easy
EMI
readings before and after a dirty electricity filter is installed in an
outlet are shown simultaneously on the same screen (in millivolts).
"After filter" display screen also shows the % reduction in total EMI
between 2 Kilohertz and 10 Megahertz.
Includes special audio function -- HEAR the difference!
You
can listen to the dirty electricity on a circuit when the Greenwave EMI
meter is plugged in. Hear the EMI "noise" decrease when you install a
dirty electricity filter in the outlet.
MODELS
The Greenwave Broadband EMI Meter currently comes in two models:
- 120-volt model:
Compatible with AC electrical systems/circuits with voltage ratings
from 100 volts up to 150 volts (for example: 100v, 110v, 115v, 120v, and
127v)
- 240-volt model: Compatible with AC electrical systems/circuits with voltage ratings from 200 volts up to 250 volts (for example: 220v, 230v, 240v).
Find
out how much dirty electricity is in your environment. Determine
whether it is worse along some circuits and in some rooms than others.
See how much it decreases by installing dirty electricity filters in
outlets. Do all this and more with the GreenwaveEMI meter.
Dirty electricity is electromagnetic interference (EMI) on AC power
lines. This potentially harmful electro-pollution is emitted by light
dimmer switches, compact fluorescent light bulbs, computers, TVs,
cordless phones, and many other electrical devices.
Its all around us in our homes, schools, workplaces, and other settings.
We are located in Toronto, Ontario Canada
